首页> 外文学位 >An improved model for prediction of particulate matter from surface mining operations.
【24h】

An improved model for prediction of particulate matter from surface mining operations.

机译:一种改进的模型,用于预测来自露天采矿作业的颗粒物。

获取原文
获取原文并翻译 | 示例

摘要

Air quality permits are required for the construction of all new surface mining operations. An air quality permit requires a surface mining operation to estimate the type and amount of pollutants the facility will produce. During surface mining the most common pollutant is particulate matter having an aerodynamic diameter less than 10 microns (PM10).; The Industrial Source Complex (ISC3) model, created by the United States Environmental Protection Agency (U.S. EPA), is a model used for predicting dispersion of pollutants from industrial facilities, including surface mines and quarries. The use of this model is required when applying for a surface mining permit. However, the U.S. EPA and mining companies have repeatedly demonstrated that this model over-predicts the amount of PM10 dispersed by surface mining facilities, resulting in denied air quality permits.; Past research has shown that haul trucks create the majority (80--90%) of PM10 emissions from surface mining operations. Therefore, this research concentrated on improving the ISC3 model by focusing on modeling PM10 emissions from mobile sources, specifically haul trucks at surface mining operations.; Research into the ISC3 model showed that its original intended use was for facilities that emit pollutants via smoke stacks. The method used to improve the ISC3 model consisted of applying the dispersion equation used by the ISC3 model in a manner more representative of a moving haul truck. A new model called the Dynamic Component Program was developed to allow modeling of dust dispersion from haul trucks.; To validate the Dynamic Component Program, field experiments were designed and conducted. These experiments measured PM10 from haul trucks at two different surface mining operations. The resulting analysis of the Dynamic Component Program, ISC3 model, and the actual field study results showed that the Dynamic Component Program was a 77% improvement over the ISC3 model overall.
机译:所有新露天采矿场的建设均需要空气质量许可证。空气质量许可证要求露天采矿作业以估算该设施将产生的污染物的类型和数量。在露天采矿期间,最常见的污染物是空气动力学直径小于10微米(PM10)的颗粒物。由美国环境保护局(U.S. EPA)创建的工业源综合体(ISC3)模型是用于预测工业设备(包括露天矿山和采石场)中污染物扩散的模型。申请露天采矿许可证时需要使用此模型。但是,美国EPA和采矿公司已反复证明,该模型高估了露天采矿设施散布的PM10量,导致空气质量许可证被拒。过去的研究表明,运输卡车在地面采矿作业中产生了大部分(80--90%)PM10排放量。因此,这项研究集中在通过对移动源(尤其是露天采矿作业中的牵引车)PM10排放进行建模来改善ISC3模型。对ISC3模型的研究表明,其最初的用途是用于通过烟囱排放污染物的设施。用于改进ISC3模型的方法包括以更能代表移动运输卡车的方式应用ISC3模型使用的色散方程。开发了一个称为“动态组件程序”的新模型,可以对卡车的扬尘进行建模。为了验证动态组件程序,设计并进行了现场实验。这些实验在两个不同的露天采矿作业中测量了运货卡车的PM10。动态组件程序,ISC3模型的结果分析和实际的现场研究结果表明,动态组件程序比ISC3模型整体提高了77%。

著录项

  • 作者

    Reed, William Randolph.;

  • 作者单位

    Virginia Polytechnic Institute and State University.;

  • 授予单位 Virginia Polytechnic Institute and State University.;
  • 学科 Engineering Mining.; Environmental Sciences.
  • 学位 Ph.D.
  • 年度 2003
  • 页码 526 p.
  • 总页数 526
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 矿业工程;环境科学基础理论;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号