首页> 外文学位 >Reactions of high-k gate dielectrics: Studies in hafnium, zirconium, yttrium, and lanthanum-based dielectrics and in-situ infrared results for hafnium dioxide atomic layer deposition.
【24h】

Reactions of high-k gate dielectrics: Studies in hafnium, zirconium, yttrium, and lanthanum-based dielectrics and in-situ infrared results for hafnium dioxide atomic layer deposition.

机译:高k栅极电介质的反应:在ha,锆,钇和镧基电介质以及二氧化ha原子层沉积的原位红外结果方面的研究。

获取原文
获取原文并翻译 | 示例

摘要

According to the International Technology Roadmap for Semiconductors (2004) integrating a high dielectric constant (high-k) material into the gate stack will be necessary within the next two years (i.e., by 2007) to maintain the rate of scaling that has come to characterize the microelectronics industry. This work presents results for Y-, Zr-, Hf-, and La-based high-k gate dielectrics prepared by ex-situ oxidation of sputtered thin metal films and for HfO2 prepared by atomic layer deposition (ALD).;The kinetics of substrate consumption during formation of yttrium silicate thin films were studied. We find results consistent with high-k dielectric formation by a two-step process in which yttrium metal reacts with the silicon substrate to form a metal silicide which is then oxidized to form the yttrium silicate dielectric. In other experiments, we show flatband voltage shifts of -0.2 and -0.95V in devices containing Zr-based dielectrics formed by oxidation of 8A of Zr metal on Si at 600°C in N2O for 15 and 300s, respectively. Silicon oxidized in the same environment does not show this shift. The fixed charge scales with EOT for these films and is consistent with charge generation due to disruption of the SiO2 network by metal ions. Zr-based dielectrics exhibit this effect more strongly than Hf-based dielectrics. We show that La-based dielectrics absorb atmospheric H2 O and CO2, and that reactions between these materials and deposited silicon electrodes are accelerated when H2O or other OH species are present at the interface. We show that the electrical properties of gate stacks having Ru and RuO2 electrodes in contact with PVD Y-silicate are more stable during thermal anneal than similar gate stacks having PVD ZrO2 or CVD Al2O3 dielectrics.;For this work, we configured a Fourier transform infrared spectrometer for in-situ attenuated total reflection measurements and investigated ALD deposition of HfO2. We report the direct reaction of tetrakis(diethylamino) hafnium (TDEAHf) with SiH groups on HF-last Si. Island growth of HfO2 occurs, and SiH features are still present and shrinking after 200 cycles. To the best of our knowledge, these are the first in-situ FTIR results presented for atomic layer deposition using TDEAHf/H2O chemistry.
机译:根据国际半导体技术路线图(2004年),在未来两年内(即到2007年),有必要将高介电常数(high-k)材料集成到栅堆叠中,以保持已达到的缩放比例微电子工业的特征。这项工作介绍了通过溅射金属薄膜的非原位氧化制备的Y-,Zr-,Hf-和La基高k栅极电介质以及通过原子层沉积(ALD)制备的HfO2的结果。研究了硅酸钇薄膜形成过程中的衬底消耗。我们发现与通过两步过程形成高k电介质相符的结果,在该过程中,钇金属与硅衬底反应形成金属硅化物,然后将其氧化形成硅酸钇电介质。在其他实验中,我们显示了含有Zr基电介质的器件的平带电压偏移为-0.2和-0.95V,该器件通过在600°C的N2O中氧化Zr金属的8A在N2O中分别氧化15s和300s形成。在相同环境中氧化的硅不会显示出这种变化。这些薄膜的固定电荷随EOT缩放,并且与由于金属离子破坏SiO2网络而产生的电荷一致。基于Zr的电介质比基于Hf的电介质表现出更强的效果。我们表明,基于La的电介质吸收大气中的H2 O和CO2,并且当界面上存在H2O或其他OH种类时,这些材料与沉积的硅电极之间的反应会加速。我们表明,与具有PVD ZrO2或CVD Al2O3介电质的类似栅叠层相比,在热退火过程中具有Ru和RuO2电极与PVD Y-硅酸盐接触的栅叠层的电性能更稳定。光谱仪用于原位衰减全反射测量,并研究了HfO2的ALD沉积。我们报告了四(二乙氨基)ha(TDEAHf)与HF-last Si上的SiH基团的直接反应。发生HfO2的岛状生长,并且SiH特征仍然存在并且在200个循环后会缩小。据我们所知,这是使用TDEAHf / H2O化学方法首次提出的原子层沉积原位FTIR结果。

著录项

  • 作者

    Kelly, Michael Jason.;

  • 作者单位

    North Carolina State University.;

  • 授予单位 North Carolina State University.;
  • 学科 Engineering Chemical.;Engineering Electronics and Electrical.
  • 学位 Ph.D.
  • 年度 2005
  • 页码 238 p.
  • 总页数 238
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号