首页> 外文学位 >Mechanisms of surfactant enhanced oil recovery in oil-wet fractured carbonate reservoirs.
【24h】

Mechanisms of surfactant enhanced oil recovery in oil-wet fractured carbonate reservoirs.

机译:表面活性剂增强油湿裂碳酸盐岩油藏采收率的机理。

获取原文
获取原文并翻译 | 示例

摘要

Oil recovery by conventional water-flooding is not effective for fractured carbonate systems which are usually oil-wet in nature. The water bypasses through the fractures and due to negative capillary pressure is not imbibed into the oil-wet matrix. Alkaline surfactant solutions are used to recover oil from these reservoirs by enhancing the imbibition of water between fracture and the matrix by both wettability alteration and interfacial tension (IFT) reduction.; Surfactants have been identified which can lower the IFT between the oil and aqueous phase. The reduction in IFT leads to mobilization of the oil by buoyancy forces. Surfactants have also been identified which can alter the wettability of the porous medium from an initially oil-wet to a final intermediate-wet to water-wet regime. This change in wettability leads to positive capillary pressure and provides a driving force for spontaneous counter-current imbibition. Anionic surfactants adsorb on the calcite mineral as calcite mineral is positively charged at neutral pH. Alkaline solution of Na2CO 3 is used to increase the pH of the solution above the point of zero charge for calcite. Preparation of surfactant solutions in Na2CO 3 is found to significantly reduce the adsorption of surfactant solutions on calcite mineral.; Surfactants which give low IFT and alter the wettability to intermediate-wet/water-wet regime were used for imbibition studies on an initially oil-wet carbonate rock. The imbibition results show that surfactant brine imbibition can lead to 40%-62% recoveries of oil in terms of original oil in place (OOIP). No oil recovery was observed when the rock was surrounded by field brine alone. Different parameters were varied to study the sensitivity of the process. The process of surfactant brine imbibition for oil recovery was found to be robust. The rates of recoveries increase with increase in permeability, decrease of rock height, and decrease in oil viscosity. The rates of recoveries were found to overlap each other when scaled with gravitational dimensionless group indicating that gravity is the major driving force for oil recovery.; A numerical simulator was developed which simulates the process of surfactant brine imbibition. It is a two phase, four component (oil, water, surfactant and salt) implicit finite volume simulator with flexible grid structure and flexible boundary conditions. It incorporates surfactant diffusion into the porous medium, which alters the IFT and wettability of the rock. The changes in IFT and wettability lead to changes in residual saturations, relative permeabilities of both phases and also alter the capillary pressure. The numerical simulator accounts for these changes.; The simulator is used to model water imbibition into water-wet medium with no surfactant present. The results obtained from these simulations show consistency between the simulated results and those obtained from theoretical dimensionless groups used in literature. It was found that even for a strongly water-wet medium, gravitational forces play an important role for oil-recovery. The effect of gravity is found to become more prominent as the fracture block dimensions were increased.; The simulation of lab-scale surfactant brine imbibition experiments showed a match between the experimental results and the numerical simulation. The simulator was then used to analyze the mechanisms involved in oil recovery for fractured carbonates using surfactant-brine process. It was found that when the surfactants alter the wettability to a water-wet regime, surfactants which do not lower the IFT to low values (>0.1 mN/m) recover more oil and the rate of recovery is almost independent of the permeability of the porous medium (between 0.1 mD and 150 mD). So cationic surfactants recovery rates are higher if they are able to alter the wettability to water-wet regime. If the surfactants do not alter wettability to water-wet regime, then gravitational forces could still be used
机译:通过常规注水进行的油采对于通常是油湿的压裂碳酸盐体系无效。水绕过裂缝而流过,并且由于毛细管负压而没有吸收到油湿基质中。碱性表面活性剂溶液可通过改变润湿性和降低界面张力(IFT)来增强裂缝和基质之间的水吸收,从而从这些储层中采油。已经鉴定出可以降低油相和水相之间的IFT的表面活性剂。 IFT的减少导致浮力使油动员。还已经确定了可以改变多孔介质的润湿性的表面活性剂,其从最初的油润湿到最终的中间润湿到水润湿状态。润湿性的这种变化导致毛细血管正压,并为自发逆流吸收提供驱动力。阴离子表面活性剂吸附在方解石矿物上,因为方解石矿物在中性pH下带正电。 Na 2 CO 3碱性溶液用于将溶液的pH值提高至方解石的零电荷点以上。发现在Na 2 CO 3中制备表面活性剂溶液可显着减少表面活性​​剂溶液在方解石矿物上的吸附。赋予低IFT并改变其对中湿/水湿状态的润湿性的表面活性剂被用于在最初是油湿的碳酸盐岩石上的吸水研究。吸收结果表明,以原位油(OOIP)计,表面活性剂盐水的吸收可导致油回收率达到40%-62%。当岩石仅被田间盐水包围时,没有发现石油采收。改变不同的参数以研究过程的敏感性。发现用于油采收的表面活性剂盐水吸收过程是稳定的。采收率随着渗透率的增加,岩石高度的降低和油粘度的降低而增加。当用无量纲引力定标时,发现回收率彼此重叠,表明重力是石油采收的主要驱动力。开发了数值模拟器,其模拟了表面活性剂盐水吸收的过程。它是一个两相,四个成分(油,水,表面活性剂和盐)的隐式有限体积模拟器,具有灵活的网格结构和灵活的边界条件。它使表面活性剂扩散到多孔介质中,从而改变了岩石的IFT和润湿性。 IFT和润湿性的变化会导致残余饱和度的变化,两相的相对渗透率的变化以及毛细管压力的变化。数值模拟器解释了这些变化。该模拟器用于在不存在表面活性剂的情况下将水吸收到水润湿的介质中进行建模。从这些模拟获得的结果表明,模拟结果与从文献中使用的理论无量纲组获得的结果之间具有一致性。发现即使对于强水润湿的介质,重力也对油的回收起着重要作用。随着裂缝块尺寸的增加,重力作用变得更加突出。实验室规模的表面活性剂盐水吸收实验的模拟表明,实验结果与数值模拟是一致的。然后,使用该模拟器使用表面活性剂-盐水工艺分析与压裂碳酸盐岩采油有关的机理。已发现,当表面活性剂将润湿性改变为水润湿方式时,不会将IFT降低至低值(> 0.1 mN / m)的表面活性剂可回收更多的油,回收率几乎与油的渗透率无关。多孔介质(介于0.1 mD和150 mD之间)。因此,如果阳离子表面活性剂能够改变对水的润湿性,则其回收率会更高。如果表面活性剂不会改变对水的润湿性,那么仍然可以使用重力

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号