首页> 外文学位 >A study of force-motion and vibration transmission properties of seated body under vertical vibration and effects of sitting posture.
【24h】

A study of force-motion and vibration transmission properties of seated body under vertical vibration and effects of sitting posture.

机译:座椅在垂直振动和坐姿影响下的力-运动和振动传递特性研究。

获取原文
获取原文并翻译 | 示例

摘要

This dissertation research concerns with characterization of the biodynamic responses of seated human body to vibration in terms of force-motion and vibration transmission properties. The force-motion biodynamic responses were measured considering the primary driving-point (seat-buttock interface) using 13 male and 14 female subjects under different postural and excitation conditions. The force-motion data were also analyzed to derive the power absorbed within the vibration-exposed body, apart from the apparent mass (APMS). The measured data are interpreted to demonstrate the significant effects of sitting postures, involving variations in backrest support, hands position and seat geometry, on the biodynamic responses. The results revealed most significant effect of the body mass. The results attained from ANCOVA further show that the primary resonant frequency and bandwidth of the biodynamic responses are strongly influenced by the combined effects of hands position and back support condition, while the peak magnitude is further affected by the seat height. Owing to the limitations of the single-driving point force-motion relationships, experiments were undertaken to measure both the force-motion and transmission of seat vibration to the head simultaneously. A secondary driving-point, formed by the backrest and upper body, is also incorporated for fully characterizing the force-motion biodynamics of the body seated with a back support. An adjustable head-strap comprising a three-axes acceleration measurement system was developed to measure the vibration transmitted to the seated subjects' head. These experiments were performed with 12 adult male subjects and the data were analyzed to derive the biodynamic responses in terms of seat-to-head transmissibility (STHT), total apparent mass measured at the seat pan, cross-axis apparent mass of the upper body reflected at the back support. The results attained were used to characterize the roles of various contributing factors, such as back support condition, hands position and excitation magnitude. The results reveal the non-linearities in the APMS and STHT responses. The results of the ANOVA further show the strong influences of the three back support conditions on both vertical and fore-and-aft STHT responses over the entire frequency ranges. The vertical APMS magnitudes in the vicinity of the secondary resonance tend to be higher for the back supported postures.;The model validity is further demonstrated in terms of the absorbed power property of the seated body. Considering that the physical responses of the tissues are more directly related to localized responses, alternate methods that can predict the distributed absorbed power property in body segment are realized in both one-dimensional and two-dimensional models. (Abstract shortened by UMI.).;The mechanical equivalent models of the seated body are further attempted on the basis of observed biodynamic responses. Owing to the significant effects of the back support conditions, one-and two-dimensional models are formulated to simulate the APMS and STHT responses for all three back support conditions. The target datasets, however, are limited to those representing mean body mass of 75.58 kg in the excitation of 1m/s2 rms acceleration (0.5-15 Hz). A 4-DOF one-dimensional model is developed using simultaneously measured vertical APMS and STHT response. The model parameters are identified for the three back support conditions respectively to emphasize the significance of back support conditions. The model parameter analysis suggest that both the force-motion and motion-motion measures need to be satisfied in order to obtain a more reliable model parameter set. The two-dimensional 5-DOF model allows for the consideration of the upper body interactions with the inclined backrest support. The identified models show good agreements with the measured target responses in APMS measured at the seat pan and the backrest, and vertical STHT.
机译:本论文的研究涉及就力运动和振动传递特性而言,就座人体对振动的生物动力响应的表征。考虑了主要的驱动点(座椅-臀部界面),使用13位男性和14位女性受试者在不同的姿势和兴奋条件下测量了力量运动生物动力响应。除表观质量(APMS)外,还对力-运动数据进行了分析,以得出在振动体内吸收的功率。解释所测得的数据以证明坐姿的重大影响,包括靠背支撑,双手位置和座椅几何形状的变化对生物力学反应的影响。结果显示了体重的最显着影响。从ANCOVA获得的结果进一步表明,生物动力学响应的主要共振频率和带宽受手位置和靠背状况的综合影响强烈影响,而峰值幅度则进一步受座椅高度影响。由于单驱动点力-运动关系的局限性,进行了实验以同时测量力-运动和座椅振动到头部的传递。还包括一个由靠背和上身形成的辅助驱动点,用于充分表征靠背支撑的人体的力量运动生物力学。开发了一种可调节的头带,该头带包括三轴加速度测量系统,用于测量传递到就座受试者头部的振动。对12名成年男性受试者进行了这些实验,并对数据进行了分析,以得出座椅到头部的透过率(STHT),在座椅底板上测量的总表观质量,上身的横轴表观质量的生物动力响应。反映在后面的支持。所获得的结果用于表征各种影响因素的作用,例如背部支撑状况,手的位置和兴奋程度。结果揭示了APMS和STHT响应中的非线性。方差分析的结果进一步表明,在整个频率范围内,三个后支撑条件对垂直STHT和前后STHT响应均具有强烈影响。对于背部支撑姿势,在二次共振附近的垂直APMS幅度往往更高。在就座体的吸收功率特性方面,进一步证明了模型的有效性。考虑到组织的物理反应与局部反应更直接相关,在一维和二维模型中都实现了可以预测人体节段中分布的吸收功率特性的替代方法。 (UMI缩短了摘要。);在观察到的生物动力反应的基础上,进一步尝试了座体的力学等效模型。由于后支撑条件的显着影响,建立了一维和二维模型来模拟所有三个后支撑条件的APMS和STHT响应。但是,目标数据集仅限于那些在1m / s2 rms加速度(0.5-15 Hz)的激励下代表平均体重75.58 kg的数据集。使用同时测量的垂直APMS和STHT响应建立了4自由度一维模型。分别针对三个后支撑条件确定模型参数,以强调后支撑条件的重要性。模型参数分析表明,需要同时满足力运动和运动运动两种措施,才能获得更可靠的模型参数集。二维5自由度模型考虑了上身与倾斜靠背支撑的相互作用。识别出的模型与在座椅底板和靠背以及垂直STHT处测得的APMS中的目标响应显示出良好的一致性。

著录项

  • 作者

    Wang, Wenping.;

  • 作者单位

    Concordia University (Canada).;

  • 授予单位 Concordia University (Canada).;
  • 学科 Mechanical engineering.
  • 学位 Ph.D.
  • 年度 2007
  • 页码 254 p.
  • 总页数 254
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号