首页> 外文会议>Passive Components and Fiber-based Devices pt.2 >Future optical communication networks beyond 160 Gbit/s based on OTDM
【24h】

Future optical communication networks beyond 160 Gbit/s based on OTDM

机译:基于OTDM的超过160 Gbit / s的未来光通信网络

获取原文
获取原文并翻译 | 示例

摘要

The virtually unlimited bandwidth of optical fibers has caused a great increase in data transmission speed over the past decade and, hence, stimulated high-demand multimedia services such as distance learning, video-conferencing and peer to peer applications. For this reason data traffic is exceeding telephony traffic, and this trend is driving the convergence of telecommunications and computer communications. In this scenario Internet Protocol (IP) is becoming the dominant protocol for any traffic, shifting the attention of the network designers from a circuit switching approach to a packet switching approach. A role of paramount importance in packet switching networks is played by the router that must implement the functionalities to set up and maintain the inter-nodal communications. The main functionalities a router must implement are routing, forwarding, switching, synchronization, contention resolution, and buffering. Nowadays, opto-electronic conversion is still required at each network node to process the incoming signal before routing that to the right output port. However, when the single channel bit rate increases beyond electronic speed limit, Optical Time Division Multiplexing (OTDM) becomes a forced choice, and all-optical processing must be performed to extract the information from the incoming packet. In this paper enabling techniques for ultra-fast all-optical network will be addressed. First a 160 Gbit/s complete transmission system will be considered. As enabling technique, an overview for all-optical logics will be discussed and experimental results will be presented using a particular reconfigurable NOLM based on Self-Phase-Modulation (SPM) or Cross-Phase-Modulation (XPM). Finally, a rough experiment on label extraction, all-optical switching and packet forwarding is shown.
机译:在过去的十年中,光纤的几乎无限的带宽已导致数据传输速度大大提高,因此刺激了诸如远程学习,视频会议和对等应用之类的高需求多媒体服务。因此,数据通信量已超过电话通信量,并且这种趋势正在推动电信和计算机通信的融合。在这种情况下,Internet协议(IP)成为任何流量的主要协议,这将网络设计人员的注意力从电路交换方法转移到分组交换方法。路由器在数据包交换网络中扮演着最重要的角色,该路由器必须实现建立和维护节点间通信的功能。路由器必须实现的主要功能是路由,转发,交换,同步,竞争解决和缓冲。如今,在将每个信号路由到正确的输出端口之前,仍需要在每个网络节点上进行光电转换以处理输入信号。但是,当单通道比特率增加到超过电子速度限制时,光时分多路复用(OTDM)成为强制选择,必须执行全光处理以从传入数据包中提取信息。在本文中,将讨论用于超快速全光网络的启用技术。首先将考虑一个160 Gbit / s的完整传输系统。作为使能技术,将讨论全光逻辑的概述,并使用基于自相位调制(SPM)或交叉相位调制(XPM)的特定的可重新配置NOLM来呈现实验结果。最后,显示了有关标签提取,全光交换和数据包转发的粗略实验。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号