首页> 外文会议>Optical Elastography and Tissue Biomechanics II >Spatial mapping of the biomechanical properties of rabbit cornea after cross-linking using optical coherence elastography
【24h】

Spatial mapping of the biomechanical properties of rabbit cornea after cross-linking using optical coherence elastography

机译:光学相干弹性成像技术对兔角膜交联后生物力学特性的空间定位

获取原文
获取原文并翻译 | 示例

摘要

Keratoconus, a structural degeneration of the cornea, is often treated with UV-induced collagen cross-linking (CXL) to increase tissue resistance to further deformation and degeneration. Optimal treatment would be customized to the individual and consider pre-existing biomechanical properties as well as the effects induced by CXL. This requires the capability to noninvasively measure corneal mechanical properties. In this study, we demonstrate the use of phase-stabilized swept source optical coherence elastography (PhS-SSOCE) to assess the relaxation rate of a deformation which was induced by a focused air-pulse in tissue-mimicking gelatin phantoms of various concentration and partially cross-linked rabbit corneas. The temporal relaxation process was utilized to estimate the Young's modulus from a newly developed model based elasticity reconstruction method. Due to the high spatial sensitivity of PhS-SSOCE, the deformation was only a few microns. The results show that the relaxation process was successfully used to differentiate the untreated (UT) and CXL region of the cornea. The results also indicate that the CXL regions had faster relaxation rates and greater Young's moduli than the UT regions. Therefore, this method can be used to spatially assess the stiffness of the cornea. This non-contact and noninvasive measurement technique utilizes minimal force for excitation and can be potentially used to study the biomechanical properties of ocular and other sensitive tissues.
机译:圆锥角膜是角膜的结构变性,通常用紫外线诱导的胶原蛋白交联(CXL)治疗,以增加组织抵抗进一步变形和变性的能力。最佳治疗将针对个人,并考虑预先存在的生物力学特性以及CXL引起的影响。这需要无创地测量角膜机械性能的能力。在这项研究中,我们证明了使用相位稳定的扫频光源光学相干弹性成像(PhS-SSOCE)来评估由聚焦空气脉冲在不同浓度和部分浓度的模仿组织的明胶模型中引起的变形的松弛率。交联的兔角膜。利用时间弛豫过程从新开发的基于模型的弹性重构方法估计杨氏模量。由于PhS-SSOCE具有很高的空间敏感性,因此变形只有几微米。结果表明,松弛过程已成功用于区分角膜的未处理(UT)和CXL区域。结果还表明,CXL区比UT区具有更快的弛豫速率和更大的杨氏模量。因此,该方法可用于空间评估角膜的硬度。这种非接触式和非侵入性的测量技术利用最小的激励力,可潜在地用于研究眼部和其他敏感组织的生物力学特性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号