DIRECT CHEMICAL OXIDATION OF MIXED OR TOXIC WASTES

摘要

Direct Chemical Oxidation (DCO) is an ambient-pressure, low-temperature (<100 ℃), and aqueous-based process for general-purpose destruction of the organic fraction of hazardous or mixed waste. It uses the peroxydisulfate anion (S_2O_8~(2-)) in acid or base solutions. The byproduct of the oxidation reaction, typically sodium or ammonium hydrogen sulfate, may be recycled elec trolytically to produce the oxidant. The oxidation kinetic reaction is first order with respect to the peroxydisulfate concentration, expressed in equivalents. The rate constant is constant for nearly all dissolved organic compounds: k_a = 0.01 +- 0.005 min~(-1). This reflects a common rate-determining step, which is the decomposition of the peroxydisulfate anion into the chemically active derivative, the sulfate radical an on, SO_4~-". This decomposition is promoted in DCO by raising the operating temperature into the range of 80-100 ℃. Rates are given for approximately 30 substances with diverse functional groups at low concentrations, and for a number of solid and liquid wastes typical of nuclear and chemical industries. The process has been scale up for treatment studies on chlorinated hydrocarbons, in which the hydrolysis of solvent mixtures was followed by oxidation of products in a series of stirred tank reactors. Cost c stimates, safety considerations, and a comprehensive bibliography are given.