首页> 外文会议>ASME International Conference on Ocean, Offshore and Arctic Engineering >THRUSTERS DIMENSIONING FOR VESSEL'S STATIONKEEPING CLOSE TO OTHER FLOATING STRUCTURES: TWO CASE STUDIES
【24h】

THRUSTERS DIMENSIONING FOR VESSEL'S STATIONKEEPING CLOSE TO OTHER FLOATING STRUCTURES: TWO CASE STUDIES

机译:船舶靠近其他浮式结构物位置的推进器尺寸确定:两个案例研究

获取原文

摘要

Brazilian offshore scenario requires innovative solutions in order to increase the efficiency of operations, while still keeping the safety and the economical constraints. The global market and naval industry cannot meet the demand of the growing exploration activities, related to the recent discovery of new oil fields. Furthermore, they are located at a large distance from the shore (approximately 300km) and the environmental conditions are severe. These facts impose more logistics problems for materials and persons transportations. The retrofitting of vessels is an alternative for increasing their operability and this option has been studied by Transpetro, subsidiary of Petrobras responsible for the Ducts, Terminals, Maritime Transport and Natural Gas segments. This paper presents two real cases of retrofitting related to the application of new technologies for positioning, including Dynamic Positioning (DP) Systems or manually operated thrusters. In the first case, a conventional tanker will be converted to a DP2 tanker, in order to operate close to drill ships and to transfer fluids during the drilling operation. The second case is related to an offshore delivering vessel used for bunkering operation. This vessel is moored at a monobuoy, and up to 2 receiving vessels may be connected to it. An aft-azimuth thruster will be installed in the vessel, increasing its capacity to change heading in harsh environmental conditions and to keep a safe distance from the monobuoy during fast variations of environmental conditions. Both cases require the application of a comprehensive design methodology for thruster dimensioning. The retrofitting imposes tight constraints to the layout and positioning of the thrusters. Also, the proximity to others vessels and the harsh environmental conditions in the offshore fields requires a combination of static and dynamic calculation in order to evaluate power consumption and drift motions of the vessels.
机译:巴西海上场景需要创新的解决方案,以提高作业效率,同时保持安全和经济约束。由于最近发现了新油田,全球市场和海军工业无法满足日益增长的勘探活动的需求。此外,它们距离海岸较远(约300公里),环境条件恶劣。这些事实给材料和人员运输带来了更多的物流问题。对船舶进行改装是提高其可操作性的一种替代方案,巴西国家石油公司负责管道、码头、海运和天然气部分的子公司Transpetro已经对该方案进行了研究。本文介绍了两个与定位新技术应用相关的改造实例,包括动态定位(DP)系统或手动推进器。在第一种情况下,传统油轮将转换为DP2油轮,以便在钻井作业期间在钻井船附近作业并输送流体。第二个案例与用于加油作业的海上运输船有关。该船停泊在单浮标上,最多可连接2艘接收船。船尾方位推进器将安装在船舶上,提高其在恶劣环境条件下改变航向的能力,并在环境条件快速变化时与单浮标保持安全距离。这两种情况都需要应用一种综合设计方法来确定推进器的尺寸。改造对推进器的布局和定位施加了严格的限制。此外,由于靠近其他船舶以及海上油田的恶劣环境条件,需要结合静态和动态计算,以评估船舶的功耗和漂移运动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号