【24h】

An analysis of Intense Pulsed Active Detection (IPAD) for the detection of special nuclear materials

机译:用于检测特殊核材料的强脉冲主动检测(iPad)分析

获取原文

摘要

This paper analyzes the Intense Pulsed Active Detection (IPAD) approach for active detection of fissile material, highlights some of its merits, and compares it to the multiple-pulse-train LINAC approach. In both cases, bremsstrahlung photons are used to induce fissions. IPAD's single, 100-ns bremsstrahlung pulse offers the possibility to utilize prompt as well as delayed neutrons emitted during the fission process. A combination of the ITS and MCNPX codes is used to characterize the dose to human tissue and both the prompt and delayed neutron emissions from the induced fissions for incident bremsstrahlung spectra between 6 and 50 MeV. No effects from shielding or from the interaction of the bremsstrahlung with the environment (water, air, etc) have been included in these computations, but these effects are a topic of ongoing work. Curves are developed that give the number of useful prompt neutrons per unit dose and the total number of delayed neutrons per unit dose that are independent of both the total electron charge delivered to the bremsstrahlung converter and the source-to-object distance. Useful prompt neutrons are defined to be those with energies exceeding the highest energy photo-neutron expected from 207Pb for a given bremsstrahlung endpoint energy. The analysis shows that endpoint energies between 9 and 13 MeV are optimum for the production of useful prompt neutrons/dose. Because the prompt signal is very fast, the detection of just two useful prompt neutrons gives a false alarm rate from cosmic-ray neutrons of less than 1 in 106. The analysis for delayed neutrons shows that above 14 MeV endpoint energies, both the neutron production and the dose increase as the endpoint energy squared. This suggests that, for a fixed body dose, no additional delayed neutrons are created above an endpoint energy of 14 MeV. A comparison of the multiple-pulse pulse-train LINAC approach and the single-pulse IPAD approach for detecting delayed neutrons- - is also presented. Because the 3-s detection time for the IPAD system is so much shorter than the 120-s detection time for the LINAC system, the IPAD system produces a signal that is much easier to separate from the cosmic-ray neutron background. This shorter time allows an IPAD system to detect fissile objects with 100% detection rate at a false alarm rate from cosmic-ray neutrons of less than 10"6 compared with a 50% detection rate for a 10% false alarm rate for the LINAC approach. Alternatively, the same detection efficiency as the LINAC approach is obtained with the detector about 2.7 times farther away from the fissile object.
机译:本文分析了裂变材料主动检测的强烈脉冲主动检测(iPad)方法,突出了其一些优点,并将其与多脉冲列车LINAC方法进行比较。在这两种情况下,Bremsstrahlung光子用于诱导排气。 iPad的单个,100ns Bremsstrahlung脉冲提供了利用裂变过程中发出的提示以及延迟中子的可能性。其和MCNPX代码的组合用于将剂量表征为人体组织,以及促进和延迟中子排放,从诱导的裂缝中出现60 meV的入射Bremsstrahlung光谱。这些计算中包含了屏蔽或来自Bremsstrahlung与环境(水,空气等)的相互作用的影响,但这些效果是正在进行的工作的主题。开发曲线,其给出每单位剂量的有用提示中子的数量和单位剂量的延迟中子的总数,其独立于输送到Bremsstrahlung转换器的总电子电荷和源极距离。有用的促销中子被定义为具有超过来自给定Bremsstrahlung终点能量的 207 Pb的最高能量照片的能量的节能。该分析表明,9至13meV之间的端点能量是用于生产有用迅速的中子/剂量的最佳选择。因为提示信号非常快,所以只有两个有用的提示中子的检测给出了来自10 6 的宇宙射线中子的误报率。延迟中子的分析表明,高于14 MeV端点能量,中子生产和剂量随着终点能量平方而增加。这表明,对于固定体剂量,不产生额外的延迟中子以上的终点能量为14 meV。还介绍了多脉冲脉冲列车方法的比较和检测延迟中子的单脉冲IPAD方法。因为iPad系统的3-S检测时间比LINAC系统的120-S检测时间短得多,所以iPad系统产生一个更容易与宇宙射线中子背景分开的信号。该较短时间允许iPad系统以小于10&#x0022的宇宙射线中子的误报率以100%检测速率检测裂变对象; 6 与50%的检测率相比LINAC方法的10%误报率。或者,通过探测器从裂变物体远离裂变物体的约2.7倍获得与LINAC方法相同的检测效率。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号