首页> 外文会议>Data compression conference >Fast Encoding Algorithms for SHVC Intra/Inter Coding
【24h】

Fast Encoding Algorithms for SHVC Intra/Inter Coding

机译:SHVC帧间/帧间编码的快速编码算法

获取原文

摘要

Scalable High-efficiency Video Coding (Scalable HEVC, SHVC) is the most recent scalable video coding standard, which is developed by the Joint Collaborative Team on Video Coding (JCT-VC). In order to meet the needs of various client terminals, network conditions, and user demands, a multi-layer encoding framework is employed to generate the scalable bitstream. In addition to the desirable scalabilities, SHVC also aims to achieve better coding efficiency than previous standards. Therefore, all the advanced coding tools ofHEVC are inherited, and several additional tools are specifically designed to support scalability. However, the superior coding efficiency is achieved at the cost of significantly increased computational complexity. Given the fact that an SHVC encoder is considerably more complex than an HEVC encoder, this makes a great demand of a fast SHVC encoder that incurs only a negligible degradation in compression efficiency. In order to address the above issue, several fast schemes have been suggested for SHVC intra and inter coding. However, temporal, spatial and inter-layer correlations have not been fully exploited. In addition, most existing algorithms aimed only at the improvement either on the intra coding process or the inter coding process. If all the available information including the texture complexity, the motion activity, as well as different types of correlation can be appropriately utilised, it is expected that the computational complexity can be reduced further. Therefore, a fast Coding Unit (CU) size decision algorithm is proposed for spatial SHVC intra coding to early terminate the CU size decision process. The energy distribution is exploited to classify the texture complexity, and the available information from the BL is used to narrow the coding depth level ranges for the LCUs in the EL. Unlikely intra modes are removed by considering the inter-layer, spatial and temporal correlations. Different candidate mode lists are constructed for the PUs of various sizes. In addition, the implementation after RMD is also improved. A fast Prediction Unit (PU) prediction mode decision method is also suggested for SHVC inter coding, in which the motion complexity and the inter-layer dependency of PU modes are jointly used to determine the best PU prediction mode for the PU in the EL. The proposed algorithms were implemented in the SHVC reference software SHM 12.0. Two-layers encoding structure was employed for spatial scalability, and the scalability factor was 2. Common test conditions were satisfied. The All Intra (AI) and Lowdelay configurations were employed to evaluate the proposed fast intra and inter coding algorithms. The quantisation parameters (QPs) for the BL and EL were (22,20), (27,25), (32,30) and (37,35). Experimental results showed that the proposed fast intra algorithm reduces the encoding time by 48% on average, while the proposed fast inter algorithm achieves an average time reduction of more than 36% over the unchanged SHM encoder, and the loss in Rate-Distortion (RD) performance is acceptable. It can be concluded that the proposed algorithms outperform the algorithms previously proposed.
机译:可伸缩高效视频编码(Scalable HEVC,SHVC)是由视频编码联合协作团队(JCT-VC)开发的最新可伸缩视频编码标准。为了满足各种客户终端,网络条件和用户需求的需求,采用了多层编码框架来生成可伸缩比特流。除了理想的可扩展性之外,SHVC还旨在实现比以前的标准更高的编码效率。因此,继承了HEVC的所有高级编码工具,并且专门设计了一些其他工具来支持可伸缩性。然而,以显着增加的计算复杂度为代价获得了优异的编码效率。考虑到SHVC编码器比HEVC编码器复杂得多的事实,这对快速SHVC编码器提出了很高的要求,该快速SHVC编码器仅导致压缩效率的可忽略的下降。为了解决上述问题,已经提出了几种用于SHVC帧内和帧间编码的快速方案。但是,时间,空间和层间相关性尚未得到充分利用。另外,大多数现有算法仅针对帧内编码过程或帧间编码过程的改进。如果可以适当地利用包括纹理复杂度,运动活动以及不同类型的相关性在内的所有可用信息,则期望可以进一步降低计算复杂度。因此,提出了一种用于空间SHVC帧内编码的快速编码单元(CU)大小决策算法,以尽早终止CU大小决策过程。利用能量分布对纹理复杂度进行分类,并使用来自BL的可用信息来缩小EL中LCU的编码深度级别范围。通过考虑层间,空间和时间相关性,不太可能删除帧内模式。针对各种大小的PU构造不同的候选模式列表。此外,RMD之后的实现也得到了改进。对于SHVC帧间编码,还提出了一种快速预测单元(PU)预测模式决策方法,该方法将运动复杂度和PU模式的层间依赖性共同用于确定EL中PU的最佳PU预测模式。所提出的算法在SHVC参考软件SHM 12.0中实现。空间可伸缩性采用两层编码结构,可伸缩性因子为2。满足常用测试条件。采用全帧内(AI)和低延迟配置来评估建议的快速帧内和帧间编码算法。 BL和EL的量化参数(QP)为(22,20),(27,25),(32,30)和(37,35)。实验结果表明,所提出的快速帧间算法平均减少了48%的编码时间,而所提出的快速帧间算法与未更改的SHM编码器相比,平均时间减少了36%以上,并且损失了码率失真(RD) )性能是可以接受的。可以得出结论,所提出的算法优于先前提出的算法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号