首页> 外文会议>International Workshop on Antenna Technology >Novel Integrated Design of a Dual-Band Dual-Polarization 5G mm-Wave Antenna Array Fed by FPCs with a U-Slotted Full-Metal Case for a Cellular Phone
【24h】

Novel Integrated Design of a Dual-Band Dual-Polarization 5G mm-Wave Antenna Array Fed by FPCs with a U-Slotted Full-Metal Case for a Cellular Phone

机译:FPC馈入的双频双极化5G毫米波天线阵列的新型集成设计,以及用于手机的U型槽全金属外壳

获取原文

摘要

A novel design of a dual-band dual-polarization millimeter-wave (mm-Wave) antenna array fed by a flexible printed circuit (FPC) integrated into a full-metal casing with U-shaped slots of a cellular phone for the fifth generation mobile communications (5G) is proposed. This integrated and conformal design is also promising to the future potential attractive antenna solution of mm-Wave antennas in non-mm-Wave antennas (AiA) especially when a metal frame or a metal casing is applied to the exterior of a cellular phone. The novel mm-Wave antenna array is based on 5 dual-band dual-polarization stacked patch antennas embedded in the metal exterior and the antenna array is fed by one FPC with 10 traces for dual polarizations of each antenna element. Owing to the ground shading of the recessed metal cells for the stacked patch antennas, the performance of the antenna array will be not so susceptible to the components or structures behind the integrated metal structures. Bases on simulations, in terms of the input reflection coefficients| Snn| ≤ -10 dB, the bandwidths of the ports (V-ports) in the mm-Wave antenna array for the vertical polarization (V-pol.) range from 27.43 GHz to 28.49 GHz and from 36.29 GHz to 40.05 GHz, respectively; similarly, the bandwidths of the ports (H-ports) in the mm-Wave antenna array for the horizontal polarization (H-pol.) range from 27.36 GHz to 28.46 GHz and from 36.64 GHz to 41.71 GHz, respectively. In other words, the two popular 5G mm-Wave bands of n261 (27.5-28.35 GHz) and n260 (37.0-40.0 GHz) in the third generation partnership project (3GPP) therefore can be accommodated. The maximum (max.) V-pol. peak realized gains in the low band (band n261) and high band (band n260) are 10.10 dBi and 11.21 dBi, and the max. scanning angles are both 45°. Similarly, the max. H-pol. peak realized gains in the low band and high band are 10.26 dBi and 10.57 dBi, and the max. scanning angles are 60° and 30°, respectively. The antenna array also can achieve right-hand and left-hand circular polarizations.
机译:第五代双频双极化毫米波(mm-Wave)天线阵列的新颖设计,该天线阵列由柔性印刷电路(FPC)馈入,该柔性印刷电路集成到具有U型槽的手机的全金属外壳中提出了移动通信(5G)。这种集成的保形设计也有望为非毫米波天线(AiA)中的毫米波天线的未来潜在诱人的天线解决方案带来希望,尤其是在将金属框架或金属外壳应用于蜂窝电话的外部时。新颖的毫米波天线阵列基于嵌入金属外壳中的5个双波段双极化堆叠式贴片天线,并且该天线阵列由一个FPC馈电,具有10条迹线,用于每个天线元件的双极化。由于用于堆叠式贴片天线的凹入式金属单元的接地阴影,天线阵列的性能将不会受到集成金属结构后面的组件或结构的影响。基于模拟,就输入反射系数而言| Snn| ≤-10 dB,毫米波天线阵列中垂直极化(V-pol。)的端口(V端口)的带宽分别为27.43 GHz至28.49 GHz和36.29 GHz至40.05 GHz;类似地,毫米波天线阵列中用于水平极化(H-pol。)的端口(H端口)的带宽分别为27.36 GHz至28.46 GHz和36.64 GHz至41.71 GHz。换句话说,因此可以容纳第三代合作伙伴计划(3GPP)中的两个流行的5261毫米波波段,分别为n261(27.5-28.35 GHz)和n260(37.0-40.0 GHz)。最大(最大)V-pol。在低频段(n261频段)和高频段(n260频段)的峰值实现增益分别为10.10 dBi和11.21 dBi,最大扫描角度均为45°。同样,最高H-pol。低频段和高频段的最大实现峰值增益分别为10.26 dBi和10.57 dBi,最大扫描角度分别为60°和30°。天线阵列还可以实现右旋和左旋圆极化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号