首页> 外文会议>International conference on Frontiers of advanced materials and engineering technology >Analysis of Influencing Factors of Ultrasonic Nondestructive Testing with Carbon Fiber Reinforced Plastics
【24h】

Analysis of Influencing Factors of Ultrasonic Nondestructive Testing with Carbon Fiber Reinforced Plastics

机译:碳纤维增强塑料超声无损检测的影响因素分析

获取原文

摘要

In order to research the influenced factors of sensitivity of ultrasonic nondestructive testing,the compared experiments using water immersion and contact method were carried out and the experimental results of sensitivities were obtained.The results showed that the limited sensitivities of probes with 1MHz and 2.25 MHz is very low.And the defects of(ψ)1 mm,which distance not exceeding lmm,can be detected by probes of 5 MHz and 10 MHz.The defects of(Φ)0.5mm can be detected by probes of 15 MHz and 20 MHz.The definition of defects apperance will be further improved for the probes with their frequency more than 15 MHz when the scanning step enough small.The distance of probes and defects has little effect on the detecting sensitivity.
机译:为了研究超声波无损检测灵敏度的影响因素,进行了水浸和接触法的对比实验,得到了灵敏度的实验结果。结果表明,探头在1MHz和2.25MHz的有限灵敏度为可以通过5 MHz和10 MHz的探头检测到(ψ)1 mm的距离(不超过1mm)的缺陷。可以通过15 MHz和20 MHz的探头检测到(Φ)0.5mm的缺陷当扫描步长足够小时,对于频率超过15 MHz的探针,缺陷外观的定义将得到进一步改善。探针和缺陷的距离对检测灵敏度的影响很小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号