【24h】

Seat forces as function of wheelchair back angle and foot rest height

机译:座椅力与轮椅后角和脚凳高度的关系

获取原文

摘要

Normal and shear forces were measured using a force plate mounted in the seat as a wheelchair back was reclined and returned to the upright and the foot rest height was changed. Ischial tuberosity (ISCH) pressure was also measured during the foot rest height change. Measurements were taken for five subjects sitting directly on the force plate and on ROHO and Jay cushions placed on the force plate. After the back was reclined 58 degrees and returned to the upright position, the normal force increased by 5.5, 9.4 and 10.1 kg and the shear force increased to 5.1, 11.6 and 12.3 kg for the HS, Jay and ROHO cushions, respectively. Leaning forward after reclining returned the forces to near the starting values. ISCH pressure measurements show that with firm thigh support, lowering the foot rests will reduce ischial tuberosity pressure.
机译:使用安装在座椅上的测力板测量法向力和剪力,因为轮椅靠背可以倾斜,然后回到直立状态,并改变脚靠的高度。坐垫高度变化期间也测量了坐骨结节(ISCH)压力。对直接坐在测力板上以及置于测力板上的ROHO和Jay坐垫上的五名受试者进行了测量。靠背倾斜58度并回到直立位置后,HS,Jay和ROHO靠垫的法向力分别增加5.5、9.4和10.1 kg,剪切力分别增加到5.1、11.6和12.3 kg。倾斜后向前倾斜,使力恢复到接近初始值。 ISCH压力测量结果表明,在牢固的大腿支撑下,降低脚踏板会降低坐骨结节压力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号