首页> 外文会议>Latin American congress on biomedical engineering >Testes Preliminares de Uso de um Dispositivo Auxiliar para o Ajuste de Bombas de Roletes Utilizadas em Circulação Extracorpórea
【24h】

Testes Preliminares de Uso de um Dispositivo Auxiliar para o Ajuste de Bombas de Roletes Utilizadas em Circulação Extracorpórea

机译:使用辅助装置调节体外循环用滚子泵的初步测试

获取原文

摘要

Roller pumps play an important role in extracorporeal blood circulation. However, pump occlusion must be properly performed and be adjusted mainly by the static and the dynamic methods. Our objective is to show preliminary results of the use of an auxiliary device for roller pump calibration via the dynamic method. Simultaneous tests have been carried out with the auxiliary device and a commercial data acquisition board and three disposable pressure transducers. The device has been also tested by perfusionists during the (XXVIII) Congresso Brasileiro de Circulação Extracorpórea. A roller pump and needed accessories for calibration via both the static and the dynamic methods have been made available to 56 perfusionists that were asked to calibrate the roller pump as they normally do in their hospital service. After each regulation the respective mean pressure of dynamic calibration was measured with our device. Results: A comparison between our device and the commercial data acquisition board has shown statistical equality for the adjusts of dynamic calibration pressure ( p > 0.05). The mean of the 56 measurements of dynamic calibration pressure was 434 ± 214 mmHg (mean ± standard deviation) and variation coefficient was VC = 49.2 %. Our results have shown that the constructed device may be used by perfusionists to quickly adjust roller pumps with great precision and repeatability. Careful tests may be initiated with our device in operating room.
机译:滚子泵在体外血液循环中起着重要作用。但是,必须适当执行泵的阻塞,并主要通过静态和动态方法进行调整。我们的目标是通过动态方法显示使用辅助设备进行滚子泵校准的初步结果。使用辅助设备,商业数据采集板和三个一次性压力传感器进行了同时测试。该器械还曾在(XXVIII)巴西国家广播电视大会期间由灌注师进行过测试。已经向56名灌注师提供了通过静态和动态方法进行校准的滚轮泵和所需的附件,这些灌装者被要求像他们在医院服务中通常所做的那样对滚轮泵进行校准。每次调节后,使用我们的设备分别测量动态校准的平均压力。结果:我们的设备与商业数据采集板之间的比较表明,动态校准压力的调整在统计上均等(p> 0.05)。动态校准压力的56次测量的平均值为434±214 mmHg(平均值±标准偏差),变异系数为VC = 49.2%。我们的结果表明,灌注器可以使用这种构造的装置快速高精度地调整滚子泵的可重复性。可能需要在手术室使用我们的设备进行仔细的测试。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号