首页> 外文会议>ASME/JSME thermal engineering joint conference;AJTEC2011 >SLIP DUE TO RAREFACTION, SURFACE ROUGHNESS, AND INTERMOLECULAR INTERACTIONS FOR GASES AND LIQUIDS
【24h】

SLIP DUE TO RAREFACTION, SURFACE ROUGHNESS, AND INTERMOLECULAR INTERACTIONS FOR GASES AND LIQUIDS

机译:由于气体和液体的反射,表面粗糙度和分子间相互作用而产生的滑动

获取原文

摘要

In the present study, slip phenomena are investigated in two different sets of experiments conducted in gases and one Newtonian liquid. Overall, differences in near-surface slip behavior are illustrated for these two different fluid mediums, where the slip is induced surface roughness and rarefaction in the gases, and by surface roughness and intermolecular interactions in the liquid. Within both sets of experiments, flows are induced within micro-fluidic passages by rotation within C-shaped fluid chambers formed between a rotating disk and a stationary surface. When gases are employed, accommodation coefficients are determined in a unique manner from experimental results and analysis based on the Navier-Stokes equations. In all cases, roughness size is large compared to molecular mean free path. When channel height is defined at the tops of the roughness elements, slip is believed to be a result of rarefaction as well as fluid shear. With this arrangement, tangential accommodation coefficients decrease and slip velocity magnitudes increase, at a particular value of Knudsen number, as the level of surface roughness increases. With Newtonian water as the working fluid, hydrophobic roughness is used to induce near-wall slip in the fluid chamber. The magnitudes of slip length and slip velocities increase as the average size of the surface roughness becomes larger. The resulting slip length data show a high degree of organization when normalized using the fluid chamber height, such that experimental data obtained using different chamber heights and different disk roughness magnitudes collapse along a single line, illustrating strong linear dependence of the slip length on the normalized radial-line-averaged shear stress.
机译:在本研究中,在气体和一种牛顿液体中进行的两组不同的实验中研究了滑移现象。总的来说,对于这两种不同的流体介质,说明了近表面滑动行为的差异,其中滑动是由气体中的表面粗糙度和稀疏性引起的,以及由液体中的表面粗糙度和分子间的相互作用引起的。在这两组实验中,通过在旋转盘和固定表面之间形成的C形流体室内旋转,在微流体通道中引起了流动。当使用气体时,可根据实验结果和基于Navier-Stokes方程的分析以独特的方式确定调节系数。在所有情况下,粗糙度大小都比分子平均自由程大。当在粗糙元件的顶部定义通道高度时,滑移被认为是稀疏性和流体剪切的结果。通过这种布置,随着表面粗糙度的增加,切向调节系数减小,并且滑移速度量级以特定的克努森数增加。使用牛顿水作为工作流体,疏水性粗糙度用于在流体腔室中引起近壁滑移。随着表面粗糙度的平均尺寸变大,滑动长度和滑动速度的大小增加。当使用流体腔室高度进行归一化时,所得的滑移长度数据显示出高度的组织性,因此,使用不同的腔室高度和不同的磁盘粗糙度大小获得的实验数据沿着一条直线折叠,说明了滑移长度对归一化的强烈线性依赖性径向线平均切应力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号