首页> 外文会议>The 2nd International Conference on Bioinformatics and Biomedical Engineering(iCBBE 2008)(第二届生物信息与生物医学工程国际会议)论文集 >Production of bioflocculant using the effluent of a hydrogen-producing bioreactor and its capacity of wastewater treatment
【24h】

Production of bioflocculant using the effluent of a hydrogen-producing bioreactor and its capacity of wastewater treatment

机译:使用产氢生物反应器的废水生产生物絮凝剂及其废水处理能力

获取原文
获取原文并翻译 | 示例

摘要

In this study, compound bioflocculant-producing bacteria, named F2-F6, were adopted as bioflocculant (BF) producer. In order to domesticate the strains of F2-F6 to utilize the effluent from a hydrogen-producing bioreactor as the only carbon resource, a method of poor-rich alternative nutrition was developed. After acclimation, the optimum fermentation conditions were investigated using only the effluent as culture substrate. The optimum fermentation conditions were to be initial pH of 7.0, fermentation time of 21 h, rotation speed of 140 rpm, temperature of 30 ℃ and no sterilization of the culture. Under these conditions, the maximum flocculation rate of the BF produced was over 93.0%. The weight-average molecular weight of BF was more than 106 Da according to the result of molecular exclusion chromatography. It was also found that the bioflocculant has high capacity of turbidity-removal, colorremoval and organic-removal up to 98.7%, 90.3% and 62.6% respectively when it was used to treat domestic wastewater, black ink wastewater and Chinese medicine wastewater.
机译:在这项研究中,采用复合生物絮凝剂生产细菌F2-F6作为生物絮凝剂(BF)生产者。为了驯化F2-F6菌株,以利用产氢生物反应器的出水作为唯一碳源,开发了一种贫乏的替代营养方法。适应后,仅使用废水作为培养底物,研究了最佳发酵条件。最佳发酵条件为初始pH为7.0,发酵时间为21 h,转速为140 rpm,温度为30℃,且不对培养物进行灭菌。在这些条件下,所产生的高炉的最大絮凝率超过93.0%。根据分子排阻色谱的结果,BF的重均分子量大于106 Da。研究还发现,该生物絮凝剂用于生活污水,黑墨废水和中药废水的除浊,脱色和有机去除率分别高达98.7%,90.3%和62.6%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号