Control design for image tracking with an inertially stabilized airborne camera platform

摘要

The paper reports on a few control engineering issues related to design and implementation of an image-based pointing and tracking system for an inertially stabilized airborne camera platform. A medium-sized platform has been developed by the authors and a few more team members within a joint governmental project coordinated by Czech Air Force Research Institute. The resulting experimental platform is based on a common double gim-bal configuration with two direct drive motors and off-the-shelf MEMS gyros. Automatic vision-based tracking system is built on top of the inertial stabilization. Choice of a suitable control configuration is discussed first, because the decoupled structure for the inner inertial rate controllers does not extend easily to the outer image-based pointing and tracking loop. It appears that the pointing and tracking controller can benefit much from availability of measurements of an inertial rate of the camera around its optical axis. The proposed pointing and tracking controller relies on feedback linearization well known in image-based visual servoing. Simple compensation of a one sample delay introduced into the (slow) visual pointing and tracking loop by the computer vision system is proposed. It relies on a simple modification of the well-known Smith predictor scheme where the prediction takes advantage of availability of the (fast and undelayed) inertial rate measurements.