FULL TEST-ZONE FIELD EVALUATION USING LARGE RCS TARGETS

摘要

Large Compact Ranges for test zone sizes of 6 meters or larger can be used for both payload or advanced antenna and RCS testing. In order to determine the range accuracy, test zone field evaluation is required. For physically large test zone dimensions, scanning of the test-zone fields is difficult and impractical in most situations. Furthermore, the accuracy of planar or plane-polar scanners is usually not sufficient for applications above 10 GHz. An alternative approach is the RCS reference target method where the test zone field is derived from the RCS measurement of a flat plate. Such a target can be manufactured as a single sheet aluminium honeycomb structure with rectangular or circular cross section. Reference targets with large dimensions and high surface accuracy are available. Consequently, test-zone fields can be accurately determined for test zone diameters up to about 10 meters and frequencies up to 100 GHz.rnIn this paper the application of this method will be demonstrate at the Compact Payload Test Range (CPTR) at ESA/ESTEC. Large rectangular plate has been used for field determination within a test-zone of 5.5 meters. A 2 meter diameter circular flat plate has been used to map the residual cross-polarization level within the test zone. It will be shown that valuable information about range performance (amplitude, phase and cross-polarization) can be accurately retrieved from the RCS measurements.