首页> 外文会议>2017 IEEE Asia Pacific Microwave Conference >A novel microstrip triplexer based on meandered loop resonators
【24h】

A novel microstrip triplexer based on meandered loop resonators

机译:基于蛇形环路谐振器的新型微带三工器

获取原文
获取原文并翻译 | 示例

摘要

In this paper, a novel microstrip triplexer is designed by using meandered dual-mode loop resonators. Proposed resonators are coupled to input and output ports by means of lumped capacitors in order to simplify the coupling paths. Thus, feedlines for the input and three output ports are not required. Center frequencies of channels can be controlled depending on the electrical lengths of the resonators. The designed triplexer has three channels at 2.5 GHz, 2.8 GHz and 3.5 GHz and it has also been fabricated and measured to validate the proposed approach. Measurements are in a good agreement with the simulations. Insertion losses have been obtained as better than 3 dB at three channels and isolations between the output ports have been observed as better than 20 dB.
机译:在本文中,通过使用弯曲的双模环路谐振器设计了一种新型的微带三工器。建议的谐振器通过集总电容器耦合到输入和输出端口,以简化耦合路径。因此,不需要输入和三个输出端口的馈线。可以根据谐振器的电气长度来控制通道的中心频率。设计的三工器具有2.5 GHz,2.8 GHz和3.5 GHz的三个通道,并且已经过制造和测量以验证所提出的方法。测量结果与仿真结果非常吻合。在三个通道上获得的插入损耗优于3 dB,并且观察到输出端口之间的隔离度也优于20 dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号