首页> 外文会议>2016 International Conference on Global Trends in Signal Processing, Information Computing and Communication >Novel high gain honeycomb shaped slotted ground microstrip patch antenna design for broadcasting fixed satellite, mobile satellite and downlink frequency applications
【24h】

Novel high gain honeycomb shaped slotted ground microstrip patch antenna design for broadcasting fixed satellite, mobile satellite and downlink frequency applications

机译:用于广播固定卫星,移动卫星和下行链路频率应用的新型高增益蜂窝状缝隙地面微带贴片天线设计

获取原文
获取原文并翻译 | 示例

摘要

This paper emphasizes on the design, analysis, fabrication and testing of honeycomb shaped ground slotted microstrip patch antenna suitable to be employed for Ku-Band Broadcasting Fixed Satellite, Mobile Satellite and Downlink Frequency applications. The proposed antenna has been designed and fabricated using flame retardant-4 (FR-4) as substrate having dielectric constant (ε) of 4.4. A flame retardant-4 (FR-4) has been employed as substrate material with thickness 1.62 mm and 80 × 80 mm dimensions. The proposed antenna has a gain of 8.874 dB, directivity of 8.995 dBi with return loss of -39.57 dB at 11.85 GHz resonant frequency. The proposed antenna has an impedance bandwidth of 105 MHz with resonant frequency of 11.85 GHz. The antenna has VSWR of 1.02. The performance of proposed antenna has been scrutinized in terms of return loss in dB, gain in dB, directivity in dBi, bandwidth in MHz, resonating frequency in GHz and VSWR. The microstrip feed line technique has been employed for proper impedance matching (48.23 Ω) in order to match the impedance of 50 ohms of SMA connector for minimal reflection losses. The antenna has been designed and simulated using Computer Simulation Technology (CST) microwave studio 2014 software. The proposed antenna has been physically fabricated and tested for experimental validation of results using Network Analyzer E5071C and anechoic chamber. It has been observed practical results of fabricated antenna match with the simulated results.
机译:本文重点介绍适用于Ku波段广播固定卫星,移动卫星和下行频率应用的蜂窝状地面缝隙微带贴片天线的设计,分析,制造和测试。所提出的天线是使用阻燃剂4(FR-4)作为介电常数(ε)为4.4的基板进行设计和制造的。阻燃剂4(FR-4)被用作基材材料,厚度为1.62 mm,尺寸为80×80 mm。所提出的天线在8.85 dB的增益,8.995 dBi的方向性以及在11.85 GHz谐振频率下的回波损耗为-39.57 dB。所提出的天线具有105 MHz的阻抗带宽,谐振频率为11.85 GHz。天线的VSWR为1.02。拟议天线的性能已根据回波损耗(dB),增益(dB),方向性(dBi),带宽(MHz),谐振频率(GHz)和VSWR进行了审查。微带馈线技术已用于适当的阻抗匹配(48.23Ω),以匹配50欧姆SMA连接器的阻抗,从而将反射损失降至最低。使用计算机仿真技术(CST)Microwave Studio 2014软件对天线进行了设计和仿真。拟议中的天线已经过物理制造,并使用网络分析仪E5071C和消声室进行了测试,以对结果进行实验验证。已经观察到制造天线的实际结果与模拟结果相匹配。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号