首页> 外文会议>2014 ACM/IEEE Fourth International Conference on Cyber-Physical Systems >Sacrificing a little space can significantly improve monitoring of time-sensitive cyber-physical systems
【24h】

Sacrificing a little space can significantly improve monitoring of time-sensitive cyber-physical systems

机译:牺牲一点空间可以显着改善对时间敏感的网络物理系统的监控

获取原文
获取原文并翻译 | 示例

摘要

The goal of runtime verification is to inspect the correctness of a system by incorporating a monitor during its execution. Predictability of time distribution of monitor invocations and memory usage are two indicators of the quality of a monitoring solution, specially in cyber-physical systems, where the physical environment is a part of the system dynamics. In our previous work, we proposed a control-theoretic approach for coordinating time predictability and memory utilization in runtime verification of time-sensitive systems. To this end, we designed controllers that attempt to improve time predictability, while ensuring the soundness of verification by incorporating a maximally utilized bounded memory buffer that accumulates events. Since the frequency of occurrence of environment actions in cyber-physical systems is not known a priori, the system may run into situations, where the buffer is full, but a monitor invocation has not yet been scheduled. In control theory, this is called the overshooting phenomenon, which inherently decreases time predictability. In this paper, we address the issue of overshoots, by employing a second controller that allows limited memory reservations to temporarily extend the size of the event buffer when the system is subject to bursts of environment actions. We apply our solution to the verification of the air/fuel ratio in a car engine exhaust. The acceptable ratio varies depending on the driving circumstances, and monitoring that ratio is important to control emissions in a vehicle. A highly predictable monitor imposes uniform load on the engine control unit (ECU), thus, not negatively or sporadically affecting its control tasks. The experimental results exhibit two significant contributions: we (1) demonstrate the advantages of applying our approach to achieve low variation in the frequency of monitor invocations for verication, while maintaining maximum memory utilization, and (2) clearly illustrate that by negligible tempor- ry increases in the size of the event buffer, the number of overshoots decreases significantly, which in turn substantially increases time predictability of runtime verication.
机译:运行时验证的目的是通过在执行过程中合并监视器来检查系统的正确性。监视器调用和内存使用的时间分布的可预测性是监视解决方案质量的两个指标,尤其是在物理环境是系统动力学一部分的网络物理系统中。在我们以前的工作中,我们提出了一种控制理论方法,用于在时间敏感系统的运行时验证中协调时间可预测性和内存利用率。为此,我们设计了一些控制器,这些控制器试图通过结合使用最大程度地利用累积事件的有界内存缓冲区来确保时间的可预测性,同时确保验证的可靠性。由于先验未知网络物理系统中环境行为的发生频率,因此系统可能会遇到缓冲区已满但尚未调度监视器调用的情况。在控制理论中,这称为过冲现象,它固有地降低了时间可预测性。在本文中,我们通过使用第二个控制器来解决过冲的问题,该控制器允许有限的内存保留在系统遭受环境突发事件时临时扩展事件缓冲区的大小。我们将解决方案应用于验证汽车发动机排气中的空燃比。可接受的比率根据驾驶环境而变化,监视该比率对于控制车辆的排放很重要。高度可预测的监视器对引擎控制单元(ECU)施加均匀的负载,因此不会对引擎的控制任务产生负面或零星的影响。实验结果显示出两个重要的贡献:我们(1)展示了应用我们的方法来实现验证的监视器调用频率变化较小的优点,同时保持了最大的内存利用率,并且(2)通过忽略不计的时间清楚地说明了这一点。如果事件缓冲区的大小增加,则过冲的次数将显着减少,这反过来会大大增加运行时验证的时间可预测性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号