RECOVERY OF PD FROM WASTE SOLUTION CONTAINING PD CATALYST USED IN COPPER NON-ELECTRIC PLATING

摘要

Through-hole copper plating is performed to make a multi-layer printed circuit board. The through hole plating is first carried out by Pd catalyst treatment, followed by copper non-electric plating. The amount of Pd catalyst used in one plant is about 0.25-2 m~3/month (8 g/dm~3 PdCl_2 base) depending on the plant scale, and the cost of the catalyst reaches 17,000―135,000 US$/month. In this study, the flow and material balance of a Pd in Pd catalyst treatment process was investigated. About 60% of Pd catalyst adheres on the through-hole and other part of setup, while 25% is released into the washing liquor. Pd in the washing liquor should be collected by a suitable method like a pressure filtration using diatomite. The material balance of Pd in Pd catalyst treatment process and the recovery method of Pd from waste solution containing Pd catalyst was investigated.