首页> 外文会议>10th International Symposium on Laser Techniques for Fluid Mechanics , Jul 10-13, 2000, Lisbon, Portugal >Liqid PIV measurements around a single gas slug rising through stagnant liquid in vertical pipes
【24h】

Liqid PIV measurements around a single gas slug rising through stagnant liquid in vertical pipes

机译:通过垂直管道中的滞留液体上升的单个气团周围的Liqid PIV测量

获取原文
获取原文并翻译 | 示例

摘要

In this work, the Particle Image Velocimetry (PIV) technique is used to characterise the flow around a single Taylor bubble rising through a vertical column of stagnant liquid. The experimental facility and its operating principle are described. The gas slug velocity is determined from the signals of two photocells that receive light from two laser diodes placed opposite them in the column. The use of fluorescent PIV particles together with an optical filter allows suppressing intense reflections at the liquid/gas interface. Details concerning the PCO CCD camera and Nd: YAG laser synchronisation are presented. The gas slug surface co-ordinates are not accurately determined from PIV images, due to spurious optical effects that occur at the bubble interface when cross illuminated by a laser sheet. These important optical effects are investigated in detail by means of a silicon model of the liquid around the bubble with the same fluorescent PIV particles embedded. An explanation for the spurious optical effects is formulated. It is argued that one of the methods that is suitable to reliably determine the bubble shape is the shadow detection technique. PIV results of the liquid flow in the rear and around the nose of the gas slug are presented. PIV measurements at the liquid film surrounding the gas slug, for laminar liquid film, are presented. The velocity profiles in the liquid film around the bubble are compared with theoretical values given by the falling film theory. The encountered differences are less than 5%. The shear stress profile in the liquid film around a gas slug is presented. Comparison between the theoretical and experimental results shows good agreement. The experimental and theoretical values match within 5 % in the liquid film at a distance from the wall of less than 2 mm; for higher distances the error grows until 15 %. Although optical problems are present near the gas/liquid interface, the results are encouraging.
机译:在这项工作中,使用粒子图像测速(PIV)技术来表征单个泰勒气泡周围的流动,该气泡通过垂直的停滞液体柱上升。描述了实验设备及其工作原理。气团速度由两个光电管的信号确定,该光电管从列中与之相对放置的两个激光二极管接收光。荧光PIV颗粒与光学滤镜一起使用可以抑制液/气界面处的强烈反射。介绍了有关PCO CCD摄像机和Nd:YAG激光同步的详细信息。气团表面的坐标不能从PIV图像中准确确定,这是由于在被激光薄片交叉照射时,气泡界面处会出现伪光学效应。这些重要的光学效应通过围绕气泡的液体的硅模型进行了详细研究,其中嵌入了相同的荧光PIV粒子。提出了对寄生光学效应的解释。有人认为,适合可靠地确定气泡形状的方法之一是阴影检测技术。给出了气团的后部和鼻部周围的液体流动的PIV结果。给出了层状液膜在气团周围液膜的PIV测量。将气泡周围液膜中的速度分布与降膜理论给出的理论值进行比较。遇到的差异小于5%。给出了气团周围的液膜中的剪切应力分布。理论和实验结果的比较显示出很好的一致性。与壁之间的距离小于2毫米时,液膜中的实验值和理论值匹配在5%以内;对于更大的距离,误差会增加到15%。尽管在气/液界面附近存在光学问题,但结果令人鼓舞。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号